So…about that Hardware run I mentioned the other day…

I was away from the house over the weekend (more on that later) and I’ve a habit of turning off the water to the house if I’m away on a road trip, however short. What I’ve noticed over a long enough period with the house water turned off is one or both of the toilet tanks will drain empty.

The leakage can’t be much or I would notice it and replace the leaky flapper valve and all is good again. But the very very slow leakage I don’t notice until I return home, turn the water back on, and hear one or both toilets in the house start filling. Which usually means a trip to the hardware store for new flapper valves. You let them dry out after a period of use and they either shrink when they get dry again or harden and won’t seal anymore.

This is something I just need to bake into a long road trip: go buy some flapper valves before leaving, so I have one or more ready for when I get back home and turn the water back on.

Anyway…this time I saw water on the bathroom floor, apparently because one or more gaskets had also failed, not badly just enough to start dripping, and I ended up replacing everything from the turn off valve to the stuff in the tank.

Which was easy and simple because the parts for my old-ish standard toilets are available practically everywhere. I am no Luddite but before buying into the latest and greatest new thing my first question is how easy is it to get parts. Because everything breaks eventually. Most of what is in my house may seem surprisingly low tech or old tech for a guy like me because of this.

When I did the big backstage tour at Walt Disney World I was told the rides that required the most maintenance by far were the water rides. In this house it’s nearly always something water touches. The sinks, the toilets, last month it was the hot water heater. I’ve had to replace my roof three times to deal with leaks. The electrical and gas services have given me next to no trouble at all, though I’ve had to replace a bunch of appliances. It’s almost always something to do with water.